National Instruments USB Flash Firmware Updater - two ways of downloading and installing the driver

USB Flash Firmware Updater is a DAQ Device hardware device. This driver was developed by National Instruments. The hardware id of this driver is USB/VID_3923&PID_735B&MI_00; this string has to match your hardware.

1. Install National Instruments USB Flash Firmware Updater driver manually

1. Download the driver setup file for National Instruments USB Flash Firmware Updater driver from the link below. This is the download link for the driver version 22.8.0.49361 dated 2022-10-02.
2.  
3. Start the driver installation file from a Windows account with administrative rights. If your UAC (User Access Control) is started then you will have to confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which should be pretty straightforward. The driver setup wizard will analyze your PC for compatible devices and will install the driver.
6.  
7. Restart your PC and enjoy the new driver, it is as simple as that.
8.  

There is no digital signature available for this driver.
Download size of the driver: 0 bytes (0 B)
Driver rating 3.4 stars out of 72032 votes.

2. How to install National Instruments USB Flash Firmware Updater driver using DriverMax

The most important advantage of using DriverMax is that it will setup the driver for you in just a few seconds and it will keep each driver up to date. How can you install a driver with DriverMax? Let's follow a few steps!

1. Start DriverMax and click on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of driver updates. Scroll the list down until you locate the National Instruments USB Flash Firmware Updater driver. Click on Update.
4.  
5. That's all, the driver is now installed!
6.