Hangzhou ToupTek Photonics Co., Ltd; http://www.touptek.com U3CMOS18000KPA USB2.0 - two ways of downloading and installing the driver

U3CMOS18000KPA USB2.0 is a Imaging Devices device. The Windows version of this driver was developed by Hangzhou ToupTek Photonics Co., Ltd; http://www.touptek.com. In order to make sure you are downloading the exact right driver the hardware id is USB/VID_0547&PID_4018.

1. Hangzhou ToupTek Photonics Co., Ltd; http://www.touptek.com U3CMOS18000KPA USB2.0 driver - how to install it manually

1. Download the driver setup file for Hangzhou ToupTek Photonics Co., Ltd; http://www.touptek.com U3CMOS18000KPA USB2.0 driver from the location below. This download link is for the driver version 1.0.0.7292 dated 2016-04-27.
2.  
3. Run the driver setup file from a Windows account with the highest privileges (rights). If your UAC (User Access Control) is running then you will have to confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which should be quite easy to follow. The driver setup wizard will scan your PC for compatible devices and will install the driver.
6.  
7. Shutdown and restart your computer and enjoy the new driver, it is as simple as that.
8.  

Hangzhou ToupTek Photonics Co., Ltd; http://www.touptek.com applied a digital signature to this driver.
Size of this driver: 32732 bytes (31.96 KB)
This driver was installed by many users and received an average rating of 4.2 stars out of 86398 votes.
This driver was released for the following versions of Windows:

• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. Installing the Hangzhou ToupTek Photonics Co., Ltd; http://www.touptek.com U3CMOS18000KPA USB2.0 driver using DriverMax: the easy way

The most important advantage of using DriverMax is that it will setup the driver for you in just a few seconds and it will keep each driver up to date, not just this one. How easy can you install a driver using DriverMax? Let's see!

1. Open DriverMax and push on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your computer.
2.  
3. Take a look at the list of driver updates. Scroll the list down until you find the Hangzhou ToupTek Photonics Co., Ltd; http://www.touptek.com U3CMOS18000KPA USB2.0 driver. Click the Update button.
4.  
5. Enjoy using the updated driver! :)
6.