Driver for Marvell SysKonnect SK-9S22 10/100/1000Base-T Dual Port Server Adapter, PCI-X, 2 Copper RJ-45 - downloading and installing it

SysKonnect SK-9S22 10/100/1000Base-T Dual Port Server Adapter, PCI-X, 2 Copper RJ-45 is a Network Adapters device. The developer of this driver was Marvell. The hardware id of this driver is PCI/VEN_1148&DEV_9000&SUBSYS_22001148.

1. Install Marvell SysKonnect SK-9S22 10/100/1000Base-T Dual Port Server Adapter, PCI-X, 2 Copper RJ-45 driver manually

1. You can download from the link below the driver setup file for the Marvell SysKonnect SK-9S22 10/100/1000Base-T Dual Port Server Adapter, PCI-X, 2 Copper RJ-45 driver. The archive contains version 12.10.14.3 released on 2013-01-08 of the driver.
2.  
3. Start the driver installer file from a user account with administrative rights. If your UAC (User Access Control) is running please accept of the driver and run the setup with administrative rights.
4.  
5. Follow the driver installation wizard, which will guide you; it should be pretty easy to follow. The driver installation wizard will scan your computer and will install the right driver.
6.  
7. When the operation finishes restart your PC in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

Marvell applied a digital signature to this driver.
Size of this driver: 227309 bytes (221.98 KB)
This driver was rated with an average of 4.6 stars by 93138 users.
This driver is fully compatible with the following versions of Windows:

• This driver works on Windows 8 32 bits
• This driver works on Windows 8.1 32 bits
• This driver works on Windows 10 32 bits
• This driver works on Windows 11 32 bits

2. Using DriverMax to install Marvell SysKonnect SK-9S22 10/100/1000Base-T Dual Port Server Adapter, PCI-X, 2 Copper RJ-45 driver

The most important advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date. How can you install a driver with DriverMax? Let's follow a few steps!

1. Start DriverMax and click on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of detected driver updates. Search the list until you locate the Marvell SysKonnect SK-9S22 10/100/1000Base-T Dual Port Server Adapter, PCI-X, 2 Copper RJ-45 driver. Click on Update.
4.  
5. That's it, you installed your first driver!
6.