ad-block

Advertising seems to be blocked by your browser.

The ads help us provide this software and web site to you for free.

Please support our project by allowing our site to show ads.





Marvell SysKonnect SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/VF-45 how to download and install the driver


SysKonnect SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/VF-45 is a Network Adapters hardware device. The developer of this driver was Marvell. PCI/VEN_1148&DEV_4320&SUBSYS_50611148 is the matching hardware id of this device.

1. Marvell SysKonnect SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/VF-45 driver - how to install it manually


  1. You can download from the link below the driver installer file for the Marvell SysKonnect SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/VF-45 driver. The archive contains version 12.10.14.3 dated 2013-01-09 of the driver.
  2.  
  3. Start the driver installer file from a user account with administrative rights. If your User Access Control Service (UAC) is enabled please accept of the driver and run the setup with administrative rights.
  4.  
  5. Go through the driver installation wizard, which will guide you; it should be quite easy to follow. The driver installation wizard will scan your PC and will install the right driver.
  6.  
  7. When the operation finishes shutdown and restart your PC in order to use the updated driver. It is as simple as that to install a Windows driver!
  8.  
Marvell applied a digital signature to this driver.
Driver file size: 246486 bytes (240.71 KB)
This driver was rated with an average of 4.8 stars by 47980 users.
This driver is fully compatible with the following versions of Windows:

  • This driver works on Windows 8 64 bits
  • This driver works on Windows 8.1 64 bits
  • This driver works on Windows 10 64 bits
  • This driver works on Windows 11 64 bits



2. How to install Marvell SysKonnect SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/VF-45 driver using DriverMax


The advantage of using DriverMax is that it will install the driver for you in the easiest possible way and it will keep each driver up to date. How can you install a driver using DriverMax? Let's follow a few steps!

  1. Open DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your computer.
  2.  
  3. Take a look at the list of driver updates. Search the list until you find the Marvell SysKonnect SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/VF-45 driver. Click on Update.
  4.  
  5. That's all, the driver is now installed!
  6.  

Drivers

ad-block

Advertising seems to be blocked by your browser.

The ads help us provide this software and web site to you for free.

Please support our project by allowing our site to show ads.