Marvell SysKonnect SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/VF-45 - two ways of downloading and installing the driver

SysKonnect SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/VF-45 is a Network Adapters hardware device. This Windows driver was developed by Marvell. PCI/VEN_1148&DEV_4320&SUBSYS_50611148 is the matching hardware id of this device.

1. Install Marvell SysKonnect SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/VF-45 driver manually

1. You can download from the link below the driver installer file for the Marvell SysKonnect SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/VF-45 driver. The archive contains version 10.51.1.9 dated 2007-12-06 of the driver.
2.  
3. Start the driver installer file from a user account with administrative rights. If your UAC (User Access Control) is started please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Follow the driver installation wizard, which will guide you; it should be pretty easy to follow. The driver installation wizard will analyze your computer and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your computer in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

This driver is digitally signed by Marvell.
Download size of the driver: 281332 bytes (274.74 KB)
This driver was installed by many users and received an average rating of 4.4 stars out of 86386 votes.
This driver is fully compatible with the following versions of Windows:

• This driver works on Windows XP 64 bits

2. Using DriverMax to install Marvell SysKonnect SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/VF-45 driver

The advantage of using DriverMax is that it will install the driver for you in the easiest possible way and it will keep each driver up to date, not just this one. How can you install a driver using DriverMax? Let's follow a few steps!

1. Open DriverMax and push on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your computer.
2.  
3. Take a look at the list of detected driver updates. Search the list until you find the Marvell SysKonnect SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/VF-45 driver. Click on Update.
4.  
5. Finished installing the driver!
6.