Driver for Marvell SysKonnect SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/MTRJ - downloading and installing it

SysKonnect SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/MTRJ is a Network Adapters hardware device. This driver was developed by Marvell. PCI/VEN_1148&DEV_4320&SUBSYS_50511148 is the matching hardware id of this device.

1. Install Marvell SysKonnect SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/MTRJ driver manually

1. Download the setup file for Marvell SysKonnect SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/MTRJ driver from the location below. This download link is for the driver version 10.51.1.9 dated 2007-12-06.
2.  
3. Run the driver setup file from a Windows account with the highest privileges (rights). If your User Access Control (UAC) is enabled then you will have to confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which should be quite easy to follow. The driver setup wizard will analyze your PC for compatible devices and will install the driver.
6.  
7. Shutdown and restart your computer and enjoy the fresh driver, as you can see it was quite smple.
8.  

Marvell applied a digital signature to this driver.
File size of the driver: 281332 bytes (274.74 KB)
This driver received an average rating of 4.2 stars out of 86138 votes.
This driver was released for the following versions of Windows:

• This driver works on Windows XP 64 bits

2. Installing the Marvell SysKonnect SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/MTRJ driver using DriverMax: the easy way

The most important advantage of using DriverMax is that it will install the driver for you in the easiest possible way and it will keep each driver up to date. How easy can you install a driver with DriverMax? Let's follow a few steps!

1. Open DriverMax and press on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your PC.
2.  
3. Take a look at the list of available driver updates. Search the list until you locate the Marvell SysKonnect SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/MTRJ driver. Click on Update.
4.  
5. That's all, the driver is now installed!
6.