Driver for Marvell SysKonnect SK-9844 Gigabit Ethernet Server Adapter SK-NET GE-SX dual link - downloading and installing it

SysKonnect SK-9844 Gigabit Ethernet Server Adapter SK-NET GE-SX dual link is a Network Adapters device. The Windows version of this driver was developed by Marvell. PCI/VEN_1148&DEV_4300&SUBSYS_98441148 is the matching hardware id of this device.

1. How to manually install Marvell SysKonnect SK-9844 Gigabit Ethernet Server Adapter SK-NET GE-SX dual link driver

1. You can download from the link below the driver setup file for the Marvell SysKonnect SK-9844 Gigabit Ethernet Server Adapter SK-NET GE-SX dual link driver. The archive contains version 10.12.6.3 dated 2007-03-13 of the driver.
2.  
3. Start the driver installer file from a user account with administrative rights. If your User Access Control Service (UAC) is started please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which will guide you; it should be quite easy to follow. The driver setup wizard will analyze your computer and will install the right driver.
6.  
7. When the operation finishes restart your PC in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
8.  

This driver is digitally signed by the manufacturer.
Download size of the driver: 227285 bytes (221.96 KB)
This driver was rated with an average of 4.6 stars by 90123 users.
This driver is compatible with the following versions of Windows:

• This driver works on Windows Server 2003 32 bits
• This driver works on Windows XP 32 bits
• This driver works on Windows Vista 32 bits
• This driver works on Windows 7 32 bits
• This driver works on Windows 8 32 bits
• This driver works on Windows 8.1 32 bits
• This driver works on Windows 10 32 bits
• This driver works on Windows 11 32 bits

2. Using DriverMax to install Marvell SysKonnect SK-9844 Gigabit Ethernet Server Adapter SK-NET GE-SX dual link driver

The most important advantage of using DriverMax is that it will install the driver for you in the easiest possible way and it will keep each driver up to date. How can you install a driver using DriverMax? Let's see!

1. Open DriverMax and click on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your computer.
2.  
3. Take a look at the list of driver updates. Scroll the list down until you find the Marvell SysKonnect SK-9844 Gigabit Ethernet Server Adapter SK-NET GE-SX dual link driver. Click the Update button.
4.  
5. Finished installing the driver!
6.