ad-block

Advertising seems to be blocked by your browser.

The ads help us provide this software and web site to you for free.

Please support our project by allowing our site to show ads.





Marvell SysKonnect Marvell RDK-8006 10/100/1000Base-T Adapter, PCI, Copper RJ-45 - two ways of downloading and installing the driver


SysKonnect Marvell RDK-8006 10/100/1000Base-T Adapter, PCI, Copper RJ-45 is a Network Adapters device. The Windows version of this driver was developed by Marvell. The hardware id of this driver is PCI/VEN_1148&DEV_4320&SUBSYS_06211148; this string has to match your hardware.

1. Marvell SysKonnect Marvell RDK-8006 10/100/1000Base-T Adapter, PCI, Copper RJ-45 - install the driver manually


  1. You can download from the link below the driver setup file for the Marvell SysKonnect Marvell RDK-8006 10/100/1000Base-T Adapter, PCI, Copper RJ-45 driver. The archive contains version 11.10.7.3 released on 2009-07-20 of the driver.
  2.  
  3. Start the driver installer file from a user account with the highest privileges (rights). If your User Access Control Service (UAC) is started please confirm the installation of the driver and run the setup with administrative rights.
  4.  
  5. Follow the driver setup wizard, which will guide you; it should be pretty easy to follow. The driver setup wizard will scan your computer and will install the right driver.
  6.  
  7. When the operation finishes shutdown and restart your PC in order to use the updated driver. It is as simple as that to install a Windows driver!
  8.  
Marvell applied a digital signature to this driver.
File size of the driver: 420036 bytes (410.19 KB)
This driver received an average rating of 4.1 stars out of 51469 votes.
This driver was released for the following versions of Windows:

  • This driver works on Windows 7 (6.1) 32 bits



2. How to use DriverMax to install Marvell SysKonnect Marvell RDK-8006 10/100/1000Base-T Adapter, PCI, Copper RJ-45 driver


The advantage of using DriverMax is that it will install the driver for you in just a few seconds and it will keep each driver up to date. How can you install a driver with DriverMax? Let's follow a few steps!

  1. Open DriverMax and press on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
  2.  
  3. Take a look at the list of available driver updates. Scroll the list down until you find the Marvell SysKonnect Marvell RDK-8006 10/100/1000Base-T Adapter, PCI, Copper RJ-45 driver. Click the Update button.
  4.  
  5. That's it, you installed your first driver!
  6.  

Drivers

ad-block

Advertising seems to be blocked by your browser.

The ads help us provide this software and web site to you for free.

Please support our project by allowing our site to show ads.