Marvell SysKonnect Marvell RDK-8001 10/100/1000Base-T Adapter, PCI, Copper RJ-45 - two ways of downloading and installing the driver

SysKonnect Marvell RDK-8001 10/100/1000Base-T Adapter, PCI, Copper RJ-45 is a Network Adapters hardware device. This driver was developed by Marvell. In order to make sure you are downloading the exact right driver the hardware id is PCI/VEN_1148&DEV_4320&SUBSYS_01211148.

1. Marvell SysKonnect Marvell RDK-8001 10/100/1000Base-T Adapter, PCI, Copper RJ-45 - install the driver manually

1. You can download from the link below the driver setup file for the Marvell SysKonnect Marvell RDK-8001 10/100/1000Base-T Adapter, PCI, Copper RJ-45 driver. The archive contains version 10.12.7.3 released on 2007-03-23 of the driver.
2.  
3. Start the driver installer file from a user account with administrative rights. If your UAC (User Access Control) is started please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which will guide you; it should be quite easy to follow. The driver setup wizard will scan your PC and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your computer in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

This driver is digitally signed.
File size of the driver: 200801 bytes (196.09 KB)
Driver rating 4.5 stars out of 41439 votes.
This driver was released for the following versions of Windows:

• This driver works on Windows Vista 32 bits
• This driver works on Windows 7 32 bits
• This driver works on Windows 8 32 bits
• This driver works on Windows 8.1 32 bits
• This driver works on Windows 10 32 bits
• This driver works on Windows 11 32 bits

2. The easy way: using DriverMax to install Marvell SysKonnect Marvell RDK-8001 10/100/1000Base-T Adapter, PCI, Copper RJ-45 driver

The advantage of using DriverMax is that it will setup the driver for you in just a few seconds and it will keep each driver up to date. How easy can you install a driver using DriverMax? Let's follow a few steps!

1. Open DriverMax and push on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of driver updates. Scroll the list down until you find the Marvell SysKonnect Marvell RDK-8001 10/100/1000Base-T Adapter, PCI, Copper RJ-45 driver. Click the Update button.
4.  
5. That's it, you installed your first driver!
6.