Hewlett-Packard Company Smart Array P411 Controller driver download and installation

Smart Array P411 Controller is a SCSI Adapter device. This Windows driver was developed by Hewlett-Packard Company. The hardware id of this driver is PCI/VEN_103C&DEV_323A&SUBSYS_3247103C; this string has to match your hardware.

1. Install Hewlett-Packard Company Smart Array P411 Controller driver manually

1. You can download from the link below the driver installer file for the Hewlett-Packard Company Smart Array P411 Controller driver. The archive contains version 6.22.0.64 dated 2011-06-20 of the driver.
2.  
3. Run the driver installer file from a user account with administrative rights. If your User Access Control Service (UAC) is started please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Follow the driver setup wizard, which will guide you; it should be pretty easy to follow. The driver setup wizard will analyze your PC and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your PC in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

There is no digital signature available for this driver.

This driver received an average rating of 3.7 stars out of 79404 votes.

2. The easy way: using DriverMax to install Hewlett-Packard Company Smart Array P411 Controller driver

The most important advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date, not just this one. How easy can you install a driver using DriverMax? Let's follow a few steps!

1. Open DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of available driver updates. Scroll the list down until you locate the Hewlett-Packard Company Smart Array P411 Controller driver. Click on Update.
4.  
5. That's all, the driver is now installed!
6.