Silicon Laboratories Silicon Labs Quad CP210x USB to UART Bridge: Interface 2 how to download and install the driver

Silicon Labs Quad CP210x USB to UART Bridge: Interface 2 is a Ports hardware device. This Windows driver was developed by Silicon Laboratories. USB/VID_10C4&PID_EA71&Mi_02 is the matching hardware id of this device.

1. Silicon Laboratories Silicon Labs Quad CP210x USB to UART Bridge: Interface 2 - install the driver manually

1. You can download from the link below the driver installer file for the Silicon Laboratories Silicon Labs Quad CP210x USB to UART Bridge: Interface 2 driver. The archive contains version 6.7.0.0 dated 2014-06-11 of the driver.
2.  
3. Start the driver installer file from a user account with administrative rights. If your User Access Control (UAC) is enabled please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which will guide you; it should be pretty easy to follow. The driver setup wizard will scan your PC and will install the right driver.
6.  
7. When the operation finishes restart your PC in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
8.  

Silicon Laboratories applied a digital signature to this driver.
The file size of this driver is 1724014 bytes (1.64 MB)
Driver rating 4.4 stars out of 30871 votes.
This driver will work for the following versions of Windows:

• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. Using DriverMax to install Silicon Laboratories Silicon Labs Quad CP210x USB to UART Bridge: Interface 2 driver

The advantage of using DriverMax is that it will install the driver for you in the easiest possible way and it will keep each driver up to date. How can you install a driver with DriverMax? Let's follow a few steps!

1. Open DriverMax and press on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of driver updates. Search the list until you locate the Silicon Laboratories Silicon Labs Quad CP210x USB to UART Bridge: Interface 2 driver. Click the Update button.
4.  
5. That's all, the driver is now installed!
6.