IntegriSys S.A. Silicon Labs Quad CP210x USB to UART Bridge: Interface 0 how to download and install the driver

Silicon Labs Quad CP210x USB to UART Bridge: Interface 0 is a Ports hardware device. The Windows version of this driver was developed by IntegriSys S.A.. The hardware id of this driver is USB/VID_10C4&PID_EA71&Mi_00; this string has to match your hardware.

1. Manually install IntegriSys S.A. Silicon Labs Quad CP210x USB to UART Bridge: Interface 0 driver

1. You can download from the link below the driver setup file for the IntegriSys S.A. Silicon Labs Quad CP210x USB to UART Bridge: Interface 0 driver. The archive contains version 6.7.0.0 released on 2014-03-19 of the driver.
2.  
3. Run the driver installer file from a user account with administrative rights. If your User Access Control Service (UAC) is running please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which will guide you; it should be pretty easy to follow. The driver setup wizard will analyze your PC and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your computer in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
8.  

IntegriSys S.A. applied a digital signature to this driver.
Download size of the driver: 1471823 bytes (1.40 MB)
This driver was rated with an average of 4.9 stars by 87715 users.
This driver will work for the following versions of Windows:

• This driver works on Windows 2000 32 bits
• This driver works on Windows Server 2003 32 bits
• This driver works on Windows XP 32 bits
• This driver works on Windows Vista 32 bits
• This driver works on Windows 7 32 bits
• This driver works on Windows 8 32 bits
• This driver works on Windows 8.1 32 bits
• This driver works on Windows 10 32 bits
• This driver works on Windows 11 32 bits

2. Installing the IntegriSys S.A. Silicon Labs Quad CP210x USB to UART Bridge: Interface 0 driver using DriverMax: the easy way

The advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date, not just this one. How easy can you install a driver using DriverMax? Let's follow a few steps!

1. Open DriverMax and click on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your computer.
2.  
3. Take a look at the list of available driver updates. Scroll the list down until you locate the IntegriSys S.A. Silicon Labs Quad CP210x USB to UART Bridge: Interface 0 driver. Click on Update.
4.  
5. Enjoy using the updated driver! :)
6.