Silicon Labs Silicon Labs Quad CP2108 USB to UART Bridge: Interface 1 driver download and installation

Silicon Labs Quad CP2108 USB to UART Bridge: Interface 1 is a Ports hardware device. This Windows driver was developed by Silicon Labs. The hardware id of this driver is USB/VID_10C4&PID_EA7B&Mi_01.

1. Install Silicon Labs Silicon Labs Quad CP2108 USB to UART Bridge: Interface 1 driver manually

1. You can download from the link below the driver installer file for the Silicon Labs Silicon Labs Quad CP2108 USB to UART Bridge: Interface 1 driver. The archive contains version 11.0.0.509 dated 2021-10-29 of the driver.
2.  
3. Start the driver installer file from a user account with the highest privileges (rights). If your User Access Control Service (UAC) is started please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which will guide you; it should be pretty easy to follow. The driver setup wizard will analyze your computer and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your computer in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

Silicon Labs applied a digital signature to this driver.
File size of the driver: 69357 bytes (67.73 KB)
This driver was installed by many users and received an average rating of 4.1 stars out of 2398 votes.
This driver is compatible with the following versions of Windows:

• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. Using DriverMax to install Silicon Labs Silicon Labs Quad CP2108 USB to UART Bridge: Interface 1 driver

The most important advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date. How easy can you install a driver using DriverMax? Let's take a look!

1. Open DriverMax and press on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of detected driver updates. Search the list until you locate the Silicon Labs Silicon Labs Quad CP2108 USB to UART Bridge: Interface 1 driver. Click on Update.
4.  
5. That's it, you installed your first driver!
6.