Silicon Labs Silicon Labs Quad CP2108 USB to UART Bridge: Interface 0 how to download and install the driver

Silicon Labs Quad CP2108 USB to UART Bridge: Interface 0 is a Ports device. The developer of this driver was Silicon Labs. USB/VID_10C4&PID_EA71&Mi_00 is the matching hardware id of this device.

1. Install Silicon Labs Silicon Labs Quad CP2108 USB to UART Bridge: Interface 0 driver manually

1. You can download from the link below the driver setup file for the Silicon Labs Silicon Labs Quad CP2108 USB to UART Bridge: Interface 0 driver. The archive contains version 11.0.0.509 dated 2021-10-29 of the driver.
2.  
3. Run the driver installer file from a user account with the highest privileges (rights). If your User Access Control (UAC) is enabled please accept of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which will guide you; it should be quite easy to follow. The driver setup wizard will scan your computer and will install the right driver.
6.  
7. When the operation finishes restart your PC in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

This driver is digitally signed by the manufacturer.
Download size of the driver: 69357 bytes (67.73 KB)
This driver received an average rating of 4.8 stars out of 2329 votes.
This driver will work for the following versions of Windows:

• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. The easy way: using DriverMax to install Silicon Labs Silicon Labs Quad CP2108 USB to UART Bridge: Interface 0 driver

The advantage of using DriverMax is that it will install the driver for you in just a few seconds and it will keep each driver up to date. How can you install a driver with DriverMax? Let's follow a few steps!

1. Open DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your computer.
2.  
3. Take a look at the list of detected driver updates. Scroll the list down until you find the Silicon Labs Silicon Labs Quad CP2108 USB to UART Bridge: Interface 0 driver. Click on Update.
4.  
5. Finished installing the driver!
6.