Silicon Labs Silicon Labs Dual CP2105 USB to UART Bridge: Enhanced COM Port - two ways of downloading and installing the driver

Silicon Labs Dual CP2105 USB to UART Bridge: Enhanced COM Port is a Ports hardware device. This driver was developed by Silicon Labs. USB/VID_10C4&PID_EA7A&Mi_00 is the matching hardware id of this device.

1. Silicon Labs Silicon Labs Dual CP2105 USB to UART Bridge: Enhanced COM Port - install the driver manually

1. You can download from the link below the driver setup file for the Silicon Labs Silicon Labs Dual CP2105 USB to UART Bridge: Enhanced COM Port driver. The archive contains version 6.7.5.1893 dated 2017-10-26 of the driver.
2.  
3. Start the driver installer file from a user account with administrative rights. If your User Access Control (UAC) is enabled please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver installation wizard, which will guide you; it should be pretty easy to follow. The driver installation wizard will scan your computer and will install the right driver.
6.  
7. When the operation finishes restart your PC in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

This driver is digitally signed by Silicon Labs.
Download size of the driver: 1485309 bytes (1.42 MB)
This driver received an average rating of 4.7 stars out of 34668 votes.
This driver was released for the following versions of Windows:

• This driver works on Windows 7 32 bits
• This driver works on Windows 8 32 bits
• This driver works on Windows 8.1 32 bits

2. The easy way: using DriverMax to install Silicon Labs Silicon Labs Dual CP2105 USB to UART Bridge: Enhanced COM Port driver

The advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date, not just this one. How easy can you install a driver with DriverMax? Let's see!

1. Open DriverMax and push on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of detected driver updates. Scroll the list down until you locate the Silicon Labs Silicon Labs Dual CP2105 USB to UART Bridge: Enhanced COM Port driver. Click the Update button.
4.  
5. That's all, the driver is now installed!
6.