LSI ServeRAID C100 - two ways of downloading and installing the driver

ServeRAID C100 is a SCSI Adapter hardware device. This Windows driver was developed by LSI. In order to make sure you are downloading the exact right driver the hardware id is PCI/VEN_8086&DEV_1D69&SUBSYS_04451014.

1. How to manually install LSI ServeRAID C100 driver

1. You can download from the link below the driver installer file for the LSI ServeRAID C100 driver. The archive contains version 15.00.0120.2012 dated 2012-01-20 of the driver.
2.  
3. Run the driver installer file from a user account with administrative rights. If your User Access Control (UAC) is enabled please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Follow the driver installation wizard, which will guide you; it should be pretty easy to follow. The driver installation wizard will scan your PC and will install the right driver.
6.  
7. When the operation finishes restart your computer in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

This driver is not digitally signed.
Size of this driver: 339777 bytes (331.81 KB)
Driver rating 3.4 stars out of 84693 votes.
This driver will work for the following versions of Windows:

• This driver works on Windows Server 2003 32 bits
• This driver works on Windows XP 32 bits

2. How to install LSI ServeRAID C100 driver using DriverMax

The most important advantage of using DriverMax is that it will install the driver for you in the easiest possible way and it will keep each driver up to date, not just this one. How easy can you install a driver using DriverMax? Let's follow a few steps!

1. Open DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your computer.
2.  
3. Take a look at the list of detected driver updates. Scroll the list down until you find the LSI ServeRAID C100 driver. Click the Update button.
4.  
5. That's all, the driver is now installed!
6.