National Instruments NI PCI-8430/2 RS-232 Interface - two ways of downloading and installing the driver

NI PCI-8430/2 RS-232 Interface is a NI-Serial Peripherals device. The Windows version of this driver was developed by National Instruments. In order to make sure you are downloading the exact right driver the hardware id is PCI/VEN_1093&DEV_70DB.

1. Install National Instruments NI PCI-8430/2 RS-232 Interface driver manually

1. Download the setup file for National Instruments NI PCI-8430/2 RS-232 Interface driver from the link below. This download link is for the driver version 3.9.0.49154 released on 2012-10-20.
2.  
3. Start the driver installation file from a Windows account with administrative rights. If your User Access Control Service (UAC) is running then you will have to accept of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which should be pretty easy to follow. The driver setup wizard will analyze your PC for compatible devices and will install the driver.
6.  
7. Restart your PC and enjoy the fresh driver, it is as simple as that.
8.  

There is no digital signature available for this driver.
Download size of the driver: 0 bytes (0 B)
Driver rating 3.6 stars out of 51461 votes.

2. How to install National Instruments NI PCI-8430/2 RS-232 Interface driver using DriverMax

The most important advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date. How easy can you install a driver with DriverMax? Let's follow a few steps!

1. Open DriverMax and push on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your PC.
2.  
3. Take a look at the list of available driver updates. Scroll the list down until you locate the National Instruments NI PCI-8430/2 RS-232 Interface driver. Click the Update button.
4.  
5. That's it, you installed your first driver!
6.