Linksys, A Division of Cisco Systems, Inc. Linksys WUSB600N v2 Dual-Band Wireless-N USB Network Adapter - two ways of downloading and installing the driver

Linksys WUSB600N v2 Dual-Band Wireless-N USB Network Adapter is a Network Adapters device. The Windows version of this driver was developed by Linksys, A Division of Cisco Systems, Inc.. USB/VID_1737&PID_0079 is the matching hardware id of this device.

1. Linksys, A Division of Cisco Systems, Inc. Linksys WUSB600N v2 Dual-Band Wireless-N USB Network Adapter - install the driver manually

1. You can download from the link below the driver installer file for the Linksys, A Division of Cisco Systems, Inc. Linksys WUSB600N v2 Dual-Band Wireless-N USB Network Adapter driver. The archive contains version 5.00.00.0000 dated 2012-09-28 of the driver.
2.  
3. Start the driver installer file from a user account with administrative rights. If your User Access Control (UAC) is running please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which will guide you; it should be pretty easy to follow. The driver setup wizard will analyze your computer and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your computer in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
8.  

Linksys, A Division of Cisco Systems, Inc. applied a digital signature to this driver.
File size of the driver: 729579 bytes (712.48 KB)
This driver was rated with an average of 4.5 stars by 91537 users.
This driver will work for the following versions of Windows:

• This driver works on Windows 8 32 bits
• This driver works on Windows 8.1 32 bits
• This driver works on Windows 10 32 bits
• This driver works on Windows 11 32 bits

2. Installing the Linksys, A Division of Cisco Systems, Inc. Linksys WUSB600N v2 Dual-Band Wireless-N USB Network Adapter driver using DriverMax: the easy way

The most important advantage of using DriverMax is that it will install the driver for you in the easiest possible way and it will keep each driver up to date, not just this one. How can you install a driver with DriverMax? Let's take a look!

1. Start DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of available driver updates. Scroll the list down until you find the Linksys, A Division of Cisco Systems, Inc. Linksys WUSB600N v2 Dual-Band Wireless-N USB Network Adapter driver. Click on Update.
4.  
5. Enjoy using the updated driver! :)
6.