Driver for LSI LSI Embedded MegaRAID - downloading and installing it

LSI Embedded MegaRAID is a SCSI Adapter hardware device. This driver was developed by LSI. The hardware id of this driver is PCI/VEN_1000&DEV_0059&SUBSYS_A11115D9; this string has to match your hardware.

1. LSI LSI Embedded MegaRAID driver - how to install it manually

1. Download the driver setup file for LSI LSI Embedded MegaRAID driver from the link below. This is the download link for the driver version 15.00.0120.2012 dated 2012-01-20.
2.  
3. Start the driver setup file from a Windows account with administrative rights. If your UAC (User Access Control) is running then you will have to confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver installation wizard, which should be pretty easy to follow. The driver installation wizard will analyze your PC for compatible devices and will install the driver.
6.  
7. Restart your PC and enjoy the fresh driver, it is as simple as that.
8.  

This driver is not digitally signed.
Download size of the driver: 339777 bytes (331.81 KB)
This driver received an average rating of 3.1 stars out of 2638 votes.
This driver is compatible with the following versions of Windows:

• This driver works on Windows Server 2003 32 bits
• This driver works on Windows XP 32 bits

2. How to install LSI LSI Embedded MegaRAID driver using DriverMax

The advantage of using DriverMax is that it will setup the driver for you in just a few seconds and it will keep each driver up to date. How easy can you install a driver using DriverMax? Let's see!

1. Open DriverMax and push on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of driver updates. Scroll the list down until you locate the LSI LSI Embedded MegaRAID driver. Click on Update.
4.  
5. That's it, you installed your first driver!
6.