LSI Intel Embedded Server RAID Technology II - two ways of downloading and installing the driver

Intel Embedded Server RAID Technology II is a SCSI Adapter hardware device. This Windows driver was developed by LSI. In order to make sure you are downloading the exact right driver the hardware id is PCI/VEN_8086&DEV_1C04&SUBSYS_28228086.

1. Install LSI Intel Embedded Server RAID Technology II driver manually

1. Download the setup file for LSI Intel Embedded Server RAID Technology II driver from the location below. This download link is for the driver version 14.05.0727.2011 dated 2011-07-27.
2.  
3. Start the driver setup file from a Windows account with administrative rights. If your User Access Control Service (UAC) is enabled then you will have to accept of the driver and run the setup with administrative rights.
4.  
5. Follow the driver installation wizard, which should be quite easy to follow. The driver installation wizard will scan your PC for compatible devices and will install the driver.
6.  
7. Restart your PC and enjoy the fresh driver, it is as simple as that.
8.  

There is no digital signature available for this driver.
The file size of this driver is 227788 bytes (222.45 KB)
This driver received an average rating of 3.8 stars out of 98900 votes.
This driver was released for the following versions of Windows:

• This driver works on Windows Server 2003 32 bits
• This driver works on Windows XP 32 bits

2. How to install LSI Intel Embedded Server RAID Technology II driver using DriverMax

The most important advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date. How can you install a driver using DriverMax? Let's see!

1. Open DriverMax and push on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your computer.
2.  
3. Take a look at the list of driver updates. Search the list until you locate the LSI Intel Embedded Server RAID Technology II driver. Click the Update button.
4.  
5. Finished installing the driver!
6.