Hewlett-Packard HP LaserJet Enterprise 500 MFP M575 Series DOT4USB - two ways of downloading and installing the driver

HP LaserJet Enterprise 500 MFP M575 Series DOT4USB is a Dot4 device. This Windows driver was developed by Hewlett-Packard. The hardware id of this driver is USB/VID_03F0&PID_9F17&REV_0100.

1. Install Hewlett-Packard HP LaserJet Enterprise 500 MFP M575 Series DOT4USB driver manually

1. You can download from the link below the driver setup file for the Hewlett-Packard HP LaserJet Enterprise 500 MFP M575 Series DOT4USB driver. The archive contains version 10.1.2.7 dated 2014-08-14 of the driver.
2.  
3. Start the driver installer file from a user account with administrative rights. If your User Access Control (UAC) is enabled please accept of the driver and run the setup with administrative rights.
4.  
5. Follow the driver setup wizard, which will guide you; it should be pretty easy to follow. The driver setup wizard will analyze your computer and will install the right driver.
6.  
7. When the operation finishes restart your computer in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

This driver is not digitally signed.

This driver was rated with an average of 3.6 stars by 81540 users.

2. Installing the Hewlett-Packard HP LaserJet Enterprise 500 MFP M575 Series DOT4USB driver using DriverMax: the easy way

The most important advantage of using DriverMax is that it will install the driver for you in the easiest possible way and it will keep each driver up to date. How can you install a driver with DriverMax? Let's follow a few steps!

1. Open DriverMax and push on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your computer.
2.  
3. Take a look at the list of detected driver updates. Scroll the list down until you locate the Hewlett-Packard HP LaserJet Enterprise 500 MFP M575 Series DOT4USB driver. Click on Update.
4.  
5. That's all, the driver is now installed!
6.