Emulex HP BL8X0c i3 Dual Port FlexFabric 10Gb Embedded CNIC how to download and install the driver

HP BL8X0c i3 Dual Port FlexFabric 10Gb Embedded CNIC is a SCSI Adapter hardware device. The Windows version of this driver was developed by Emulex. PCI/VEN_19A2&DEV_0712&SUBSYS_177B103C is the matching hardware id of this device.

1. Install Emulex HP BL8X0c i3 Dual Port FlexFabric 10Gb Embedded CNIC driver manually

1. You can download from the link below the driver setup file for the Emulex HP BL8X0c i3 Dual Port FlexFabric 10Gb Embedded CNIC driver. The archive contains version 10.2.254.0 dated 2014-04-18 of the driver.
2.  
3. Start the driver installer file from a user account with the highest privileges (rights). If your User Access Control Service (UAC) is started please accept of the driver and run the setup with administrative rights.
4.  
5. Follow the driver setup wizard, which will guide you; it should be quite easy to follow. The driver setup wizard will analyze your PC and will install the right driver.
6.  
7. When the operation finishes restart your computer in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

This driver is digitally signed by the manufacturer.
Download size of the driver: 207892 bytes (203.02 KB)
This driver was rated with an average of 4.6 stars by 84002 users.
This driver is compatible with the following versions of Windows:

• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. Using DriverMax to install Emulex HP BL8X0c i3 Dual Port FlexFabric 10Gb Embedded CNIC driver

The advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date. How easy can you install a driver with DriverMax? Let's take a look!

1. Open DriverMax and push on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your PC.
2.  
3. Take a look at the list of driver updates. Search the list until you find the Emulex HP BL8X0c i3 Dual Port FlexFabric 10Gb Embedded CNIC driver. Click the Update button.
4.  
5. Enjoy using the updated driver! :)
6.