Download and install Emulex HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr driver

HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr is a Network Adapters hardware device. This driver was developed by Emulex. The hardware id of this driver is PCI/VEN_19A2&DEV_0718&SUBSYS_3392103C; this string has to match your hardware.

1. Manually install Emulex HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr driver

1. Download the driver setup file for Emulex HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr driver from the location below. This is the download link for the driver version 10.0.718.26 released on 2014-01-02.
2.  
3. Run the driver installation file from a Windows account with the highest privileges (rights). If your User Access Control (UAC) is running then you will have to confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Follow the driver setup wizard, which should be quite straightforward. The driver setup wizard will analyze your PC for compatible devices and will install the driver.
6.  
7. Shutdown and restart your computer and enjoy the fresh driver, it is as simple as that.
8.  

Emulex applied a digital signature to this driver.
The file size of this driver is 644257 bytes (629.16 KB)
This driver was installed by many users and received an average rating of 4.4 stars out of 68370 votes.
This driver is compatible with the following versions of Windows:

• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. The easy way: using DriverMax to install Emulex HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr driver

The advantage of using DriverMax is that it will install the driver for you in the easiest possible way and it will keep each driver up to date. How can you install a driver using DriverMax? Let's see!

1. Open DriverMax and click on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your computer.
2.  
3. Take a look at the list of detected driver updates. Search the list until you find the Emulex HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr driver. Click the Update button.
4.  
5. Finished installing the driver!
6.