Emulex HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr how to download and install the driver

HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr is a SCSI Adapter hardware device. The developer of this driver was Emulex. In order to make sure you are downloading the exact right driver the hardware id is PCI/VEN_19A2&DEV_0712&SUBSYS_3392103C.

1. How to manually install Emulex HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr driver

1. You can download from the link below the driver setup file for the Emulex HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr driver. The archive contains version 10.2.254.0 dated 2014-04-18 of the driver.
2.  
3. Start the driver installer file from a user account with the highest privileges (rights). If your UAC (User Access Control) is started please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Follow the driver setup wizard, which will guide you; it should be quite easy to follow. The driver setup wizard will scan your PC and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your computer in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

This driver is digitally signed by the manufacturer.
Download size of the driver: 207892 bytes (203.02 KB)
Driver rating 4.2 stars out of 84020 votes.
This driver will work for the following versions of Windows:

• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. Installing the Emulex HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr driver using DriverMax: the easy way

The most important advantage of using DriverMax is that it will install the driver for you in just a few seconds and it will keep each driver up to date, not just this one. How easy can you install a driver using DriverMax? Let's take a look!

1. Open DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your PC.
2.  
3. Take a look at the list of driver updates. Search the list until you find the Emulex HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr driver. Click on Update.
4.  
5. That's it, you installed your first driver!
6.