Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr how to download and install the driver

HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr is a SCSI Adapter device. This Windows driver was developed by Emulex. The hardware id of this driver is PCI/VEN_19A2&DEV_0712&SUBSYS_3391103C; this string has to match your hardware.

1. Manually install Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver

1. Download the driver setup file for Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver from the location below. This download link is for the driver version 10.5.121.7 released on 2015-05-30.
2.  
3. Run the driver installation file from a Windows account with administrative rights. If your User Access Control Service (UAC) is enabled then you will have to confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which should be pretty easy to follow. The driver setup wizard will scan your PC for compatible devices and will install the driver.
6.  
7. Restart your computer and enjoy the updated driver, it is as simple as that.
8.  

Emulex applied a digital signature to this driver.
Driver file size: 219889 bytes (214.74 KB)
This driver received an average rating of 4.8 stars out of 58273 votes.
This driver is compatible with the following versions of Windows:

• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. How to install Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver using DriverMax

The advantage of using DriverMax is that it will setup the driver for you in just a few seconds and it will keep each driver up to date, not just this one. How can you install a driver with DriverMax? Let's follow a few steps!

1. Start DriverMax and push on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your computer.
2.  
3. Take a look at the list of detected driver updates. Search the list until you find the Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver. Click the Update button.
4.  
5. Finished installing the driver!
6.