Driver for Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr - downloading and installing it

HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr is a SCSI Adapter device. This driver was developed by Emulex. The hardware id of this driver is PCI/VEN_19A2&DEV_0712&SUBSYS_3391103C; this string has to match your hardware.

1. Manually install Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver

1. Download the driver setup file for Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver from the location below. This is the download link for the driver version 10.2.254.0 dated 2014-04-18.
2.  
3. Start the driver setup file from a Windows account with the highest privileges (rights). If your User Access Control Service (UAC) is enabled then you will have to confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver installation wizard, which should be quite easy to follow. The driver installation wizard will analyze your PC for compatible devices and will install the driver.
6.  
7. Restart your PC and enjoy the updated driver, it is as simple as that.
8.  

Emulex applied a digital signature to this driver.
The file size of this driver is 207892 bytes (203.02 KB)
Driver rating 4.6 stars out of 84029 votes.
This driver is fully compatible with the following versions of Windows:

• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. How to use DriverMax to install Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver

The most important advantage of using DriverMax is that it will setup the driver for you in just a few seconds and it will keep each driver up to date, not just this one. How easy can you install a driver using DriverMax? Let's follow a few steps!

1. Open DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your PC.
2.  
3. Take a look at the list of detected driver updates. Search the list until you locate the Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver. Click on Update.
4.  
5. Finished installing the driver!
6.