Fresco Logic Fresco Logic USB3.0 VGA Display how to download and install the driver

Fresco Logic USB3.0 VGA Display is a AVClass hardware device. This driver was developed by Fresco Logic. The hardware id of this driver is USB/VID_1D5C&PID_8347.

1. Install Fresco Logic Fresco Logic USB3.0 VGA Display driver manually

1. You can download from the link below the driver installer file for the Fresco Logic Fresco Logic USB3.0 VGA Display driver. The archive contains version 1.1.216.00 dated 2013-11-01 of the driver.
2.  
3. Start the driver installer file from a user account with administrative rights. If your User Access Control Service (UAC) is started please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver installation wizard, which will guide you; it should be pretty easy to follow. The driver installation wizard will analyze your computer and will install the right driver.
6.  
7. When the operation finishes restart your PC in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
8.  

This driver is digitally signed.
Size of this driver: 1758058 bytes (1.68 MB)
Driver rating 4.4 stars out of 7386 votes.
This driver will work for the following versions of Windows:

• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. How to install Fresco Logic Fresco Logic USB3.0 VGA Display driver using DriverMax

The advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date, not just this one. How easy can you install a driver with DriverMax? Let's see!

1. Open DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your computer.
2.  
3. Take a look at the list of detected driver updates. Scroll the list down until you locate the Fresco Logic Fresco Logic USB3.0 VGA Display driver. Click the Update button.
4.  
5. That's all, the driver is now installed!
6.