Emulex Emulex OneConnect OCl11102-F7-X, NIC/TOE driver download and installation

Emulex OneConnect OCl11102-F7-X, NIC/TOE is a Network Adapters hardware device. The Windows version of this driver was developed by Emulex. In order to make sure you are downloading the exact right driver the hardware id is PCI/VEN_19A2&DEV_0710&SUBSYS_E71910DF.

1. Emulex Emulex OneConnect OCl11102-F7-X, NIC/TOE driver - how to install it manually

1. Download the driver setup file for Emulex Emulex OneConnect OCl11102-F7-X, NIC/TOE driver from the location below. This download link is for the driver version 4.1.370.0 dated 2012-02-06.
2.  
3. Run the driver installation file from a Windows account with administrative rights. If your User Access Control Service (UAC) is enabled then you will have to accept of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which should be quite easy to follow. The driver setup wizard will scan your PC for compatible devices and will install the driver.
6.  
7. Restart your computer and enjoy the fresh driver, as you can see it was quite smple.
8.  

Emulex applied a digital signature to this driver.
Size of this driver: 405002 bytes (395.51 KB)
This driver was rated with an average of 4.4 stars by 82240 users.
This driver is fully compatible with the following versions of Windows:

• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. How to use DriverMax to install Emulex Emulex OneConnect OCl11102-F7-X, NIC/TOE driver

The advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date. How easy can you install a driver with DriverMax? Let's follow a few steps!

1. Open DriverMax and push on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of driver updates. Scroll the list down until you locate the Emulex Emulex OneConnect OCl11102-F7-X, NIC/TOE driver. Click the Update button.
4.  
5. That's it, you installed your first driver!
6.