Download and install Emulex Emulex OneConnect OCe10102-F-SP, iSCSI Initiator driver

Emulex OneConnect OCe10102-F-SP, iSCSI Initiator is a SCSI Adapter hardware device. The Windows version of this driver was developed by Emulex. PCI/VEN_19A2&DEV_0702&SUBSYS_E60610DF is the matching hardware id of this device.

1. Install Emulex Emulex OneConnect OCe10102-F-SP, iSCSI Initiator driver manually

1. You can download from the link below the driver setup file for the Emulex Emulex OneConnect OCe10102-F-SP, iSCSI Initiator driver. The archive contains version 10.2.254.0 dated 2014-04-18 of the driver.
2.  
3. Start the driver installer file from a user account with the highest privileges (rights). If your User Access Control Service (UAC) is enabled please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which will guide you; it should be pretty easy to follow. The driver setup wizard will analyze your computer and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your computer in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

Emulex applied a digital signature to this driver.
The file size of this driver is 207892 bytes (203.02 KB)
This driver was rated with an average of 4.2 stars by 66700 users.
This driver will work for the following versions of Windows:

• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. How to install Emulex Emulex OneConnect OCe10102-F-SP, iSCSI Initiator driver using DriverMax

The most important advantage of using DriverMax is that it will install the driver for you in the easiest possible way and it will keep each driver up to date, not just this one. How can you install a driver with DriverMax? Let's see!

1. Open DriverMax and click on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your computer.
2.  
3. Take a look at the list of detected driver updates. Scroll the list down until you locate the Emulex Emulex OneConnect OCe10102-F-SP, iSCSI Initiator driver. Click on Update.
4.  
5. That's it, you installed your first driver!
6.