Hangzhou ToupTek Photonics Co., Ltd; http://www.touptek.com E3ISPM03100KPB USB2.0 - two ways of downloading and installing the driver

E3ISPM03100KPB USB2.0 is a Imaging Devices hardware device. The Windows version of this driver was developed by Hangzhou ToupTek Photonics Co., Ltd; http://www.touptek.com. The hardware id of this driver is USB/VID_0547&PID_113B; this string has to match your hardware.

1. Hangzhou ToupTek Photonics Co., Ltd; http://www.touptek.com E3ISPM03100KPB USB2.0 - install the driver manually

1. Download the setup file for Hangzhou ToupTek Photonics Co., Ltd; http://www.touptek.com E3ISPM03100KPB USB2.0 driver from the link below. This is the download link for the driver version 1.0.0.19728 dated 2021-10-22.
2.  
3. Start the driver setup file from a Windows account with administrative rights. If your UAC (User Access Control) is started then you will have to accept of the driver and run the setup with administrative rights.
4.  
5. Go through the driver installation wizard, which should be quite straightforward. The driver installation wizard will analyze your PC for compatible devices and will install the driver.
6.  
7. Restart your PC and enjoy the fresh driver, it is as simple as that.
8.  

This driver is digitally signed by the manufacturer.
Size of this driver: 49247 bytes (48.09 KB)
This driver was rated with an average of 4.6 stars by 30668 users.
This driver is fully compatible with the following versions of Windows:

• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. Using DriverMax to install Hangzhou ToupTek Photonics Co., Ltd; http://www.touptek.com E3ISPM03100KPB USB2.0 driver

The advantage of using DriverMax is that it will setup the driver for you in just a few seconds and it will keep each driver up to date. How can you install a driver with DriverMax? Let's see!

1. Open DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of available driver updates. Search the list until you find the Hangzhou ToupTek Photonics Co., Ltd; http://www.touptek.com E3ISPM03100KPB USB2.0 driver. Click the Update button.
4.  
5. That's all, the driver is now installed!
6.