ad-block

Advertising seems to be blocked by your browser.

The ads help us provide this software and web site to you for free.

Please support our project by allowing our site to show ads.





Download and install Marvell D-Link DGE-560SX Single Fiber Gigabit Ethernet PCI-E Adapter V.A1 driver


D-Link DGE-560SX Single Fiber Gigabit Ethernet PCI-E Adapter V.A1 is a Network Adapters hardware device. The Windows version of this driver was developed by Marvell. In order to make sure you are downloading the exact right driver the hardware id is PCI/VEN_1186&DEV_4346&SUBSYS_43461186.

1. Install Marvell D-Link DGE-560SX Single Fiber Gigabit Ethernet PCI-E Adapter V.A1 driver manually


  1. You can download from the link below the driver installer file for the Marvell D-Link DGE-560SX Single Fiber Gigabit Ethernet PCI-E Adapter V.A1 driver. The archive contains version 10.12.6.3 dated 2007-03-13 of the driver.
  2.  
  3. Run the driver installer file from a user account with administrative rights. If your User Access Control Service (UAC) is enabled please confirm the installation of the driver and run the setup with administrative rights.
  4.  
  5. Go through the driver installation wizard, which will guide you; it should be quite easy to follow. The driver installation wizard will analyze your computer and will install the right driver.
  6.  
  7. When the operation finishes shutdown and restart your PC in order to use the updated driver. It is as simple as that to install a Windows driver!
  8.  
Marvell applied a digital signature to this driver.
Download size of the driver: 227285 bytes (221.96 KB)
This driver was rated with an average of 4.1 stars by 34327 users.
This driver will work for the following versions of Windows:

  • This driver works on Windows XP (5.1) 32 bits
  • This driver works on Windows Server 2003 (5.2) 32 bits



2. The easy way: using DriverMax to install Marvell D-Link DGE-560SX Single Fiber Gigabit Ethernet PCI-E Adapter V.A1 driver


The advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date, not just this one. How easy can you install a driver with DriverMax? Let's see!

  1. Open DriverMax and press on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your PC.
  2.  
  3. Take a look at the list of driver updates. Scroll the list down until you locate the Marvell D-Link DGE-560SX Single Fiber Gigabit Ethernet PCI-E Adapter V.A1 driver. Click on Update.
  4.  
  5. Finished installing the driver!
  6.  

Drivers

ad-block

Advertising seems to be blocked by your browser.

The ads help us provide this software and web site to you for free.

Please support our project by allowing our site to show ads.