ad-block

Advertising seems to be blocked by your browser.

The ads help us provide this software and web site to you for free.

Please support our project by allowing our site to show ads.





LSI Corp. Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10 how to download and install the driver


Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10 is a SCSI Adapter device. This Windows driver was developed by LSI Corp.. In order to make sure you are downloading the exact right driver the hardware id is PCI/VEN_1000&DEV_0073&SUBSYS_00B61137.

1. Install LSI Corp. Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10 driver manually


  1. You can download from the link below the driver setup file for the LSI Corp. Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10 driver. The archive contains version 6.706.06.00 released on 2014-11-12 of the driver.
  2.  
  3. Run the driver installer file from a user account with the highest privileges (rights). If your User Access Control Service (UAC) is running please confirm the installation of the driver and run the setup with administrative rights.
  4.  
  5. Go through the driver setup wizard, which will guide you; it should be quite easy to follow. The driver setup wizard will scan your PC and will install the right driver.
  6.  
  7. When the operation finishes restart your computer in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
  8.  
This driver is digitally signed.
Download size of the driver: 140696 bytes (137.40 KB)
This driver was installed by many users and received an average rating of 5 stars out of 35028 votes.
This driver was released for the following versions of Windows:

  • This driver works on Windows 2000 (5.0) 64 bits
  • This driver works on Windows XP (5.1) 64 bits
  • This driver works on Windows Server 2003 (5.2) 64 bits
  • This driver works on Windows Vista (6.0) 64 bits
  • This driver works on Windows 7 (6.1) 64 bits
  • This driver works on Windows 8 (6.2) 64 bits
  • This driver works on Windows 8.1 (6.3) 64 bits
  • This driver works on Windows 10 (10.0) 64 bits



2. Using DriverMax to install LSI Corp. Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10 driver


The advantage of using DriverMax is that it will install the driver for you in just a few seconds and it will keep each driver up to date, not just this one. How easy can you install a driver using DriverMax? Let's see!

  1. Open DriverMax and press on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your PC.
  2.  
  3. Take a look at the list of detected driver updates. Scroll the list down until you locate the LSI Corp. Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10 driver. Click the Update button.
  4.  
  5. Enjoy using the updated driver! :)
  6.  

Drivers

ad-block

Advertising seems to be blocked by your browser.

The ads help us provide this software and web site to you for free.

Please support our project by allowing our site to show ads.