LSI Corp. Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10/5/50 - two ways of downloading and installing the driver

Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10/5/50 is a SCSI Adapter device. The developer of this driver was LSI Corp.. In order to make sure you are downloading the exact right driver the hardware id is PCI/VEN_1000&DEV_0073&SUBSYS_00B01137.

1. Install LSI Corp. Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10/5/50 driver manually

1. You can download from the link below the driver installer file for the LSI Corp. Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10/5/50 driver. The archive contains version 6.706.06.00 dated 2014-11-12 of the driver.
2.  
3. Start the driver installer file from a user account with the highest privileges (rights). If your UAC (User Access Control) is enabled please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver installation wizard, which will guide you; it should be pretty easy to follow. The driver installation wizard will analyze your computer and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your computer in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

LSI Corp. applied a digital signature to this driver.
Size of this driver: 140696 bytes (137.40 KB)
This driver was rated with an average of 4.3 stars by 34889 users.
This driver was released for the following versions of Windows:

• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. Using DriverMax to install LSI Corp. Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10/5/50 driver

The advantage of using DriverMax is that it will install the driver for you in just a few seconds and it will keep each driver up to date. How can you install a driver with DriverMax? Let's follow a few steps!

1. Start DriverMax and press on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your PC.
2.  
3. Take a look at the list of available driver updates. Search the list until you locate the LSI Corp. Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10/5/50 driver. Click on Update.
4.  
5. Enjoy using the updated driver! :)
6.