ad-block

Advertising seems to be blocked by your browser.

The ads help us provide this software and web site to you for free.

Please support our project by allowing our site to show ads.





Adaptec I2O RAID Adapters for 32bit Windows 2000, XP, & 2003 Adaptec 3010S Ultra3 Four Channel how to download and install the driver


Adaptec 3010S Ultra3 Four Channel is a SCSI Adapter device. The developer of this driver was Adaptec I2O RAID Adapters for 32bit Windows 2000, XP, & 2003. PCI/VEN_1044&DEV_A501&SUBSYS_C0651044 is the matching hardware id of this device.

1. Install Adaptec I2O RAID Adapters for 32bit Windows 2000, XP, & 2003 Adaptec 3010S Ultra3 Four Channel driver manually


  1. You can download from the link below the driver setup file for the Adaptec I2O RAID Adapters for 32bit Windows 2000, XP, & 2003 Adaptec 3010S Ultra3 Four Channel driver. The archive contains version 5.3.1.3 released on 2003-07-14 of the driver.
  2.  
  3. Start the driver installer file from a user account with administrative rights. If your User Access Control (UAC) is enabled please accept of the driver and run the setup with administrative rights.
  4.  
  5. Go through the driver installation wizard, which will guide you; it should be quite easy to follow. The driver installation wizard will scan your computer and will install the right driver.
  6.  
  7. When the operation finishes restart your computer in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
  8.  
There is no digital signature available for this driver.

This driver was rated with an average of 3.8 stars by 29750 users.




2. How to install Adaptec I2O RAID Adapters for 32bit Windows 2000, XP, & 2003 Adaptec 3010S Ultra3 Four Channel driver using DriverMax


The most important advantage of using DriverMax is that it will install the driver for you in just a few seconds and it will keep each driver up to date. How can you install a driver using DriverMax? Let's take a look!

  1. Open DriverMax and click on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your computer.
  2.  
  3. Take a look at the list of detected driver updates. Scroll the list down until you find the Adaptec I2O RAID Adapters for 32bit Windows 2000, XP, & 2003 Adaptec 3010S Ultra3 Four Channel driver. Click the Update button.
  4.  
  5. That's it, you installed your first driver!
  6.  

Drivers

ad-block

Advertising seems to be blocked by your browser.

The ads help us provide this software and web site to you for free.

Please support our project by allowing our site to show ads.