ad-block

Advertising seems to be blocked by your browser.

The ads help us provide this software and web site to you for free.

Please support our project by allowing our site to show ads.





Emulex Emulex OCl11104-F2-X Virtual Fabric Adapter 2-port 10Gb and 2-port 1Gb LOM - two ways of downloading and installing the driver


Emulex OCl11104-F2-X Virtual Fabric Adapter 2-port 10Gb and 2-port 1Gb LOM is a Network Adapters hardware device. This driver was developed by Emulex. PCI/VEN_19A2&DEV_0718&SUBSYS_E70C10DF is the matching hardware id of this device.

1. Emulex Emulex OCl11104-F2-X Virtual Fabric Adapter 2-port 10Gb and 2-port 1Gb LOM driver - how to install it manually


  1. You can download from the link below the driver setup file for the Emulex Emulex OCl11104-F2-X Virtual Fabric Adapter 2-port 10Gb and 2-port 1Gb LOM driver. The archive contains version 10.0.718.26 dated 2014-01-02 of the driver.
  2.  
  3. Start the driver installer file from a user account with administrative rights. If your User Access Control (UAC) is started please accept of the driver and run the setup with administrative rights.
  4.  
  5. Follow the driver installation wizard, which will guide you; it should be pretty easy to follow. The driver installation wizard will analyze your PC and will install the right driver.
  6.  
  7. When the operation finishes restart your PC in order to use the updated driver. It is as simple as that to install a Windows driver!
  8.  
Emulex applied a digital signature to this driver.
Driver file size: 644257 bytes (629.16 KB)
This driver was rated with an average of 4.2 stars by 68065 users.
This driver will work for the following versions of Windows:

  • This driver works on Windows 8 (6.2) 64 bits



2. How to use DriverMax to install Emulex Emulex OCl11104-F2-X Virtual Fabric Adapter 2-port 10Gb and 2-port 1Gb LOM driver


The most important advantage of using DriverMax is that it will setup the driver for you in just a few seconds and it will keep each driver up to date, not just this one. How easy can you install a driver using DriverMax? Let's see!

  1. Open DriverMax and push on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your PC.
  2.  
  3. Take a look at the list of driver updates. Scroll the list down until you find the Emulex Emulex OCl11104-F2-X Virtual Fabric Adapter 2-port 10Gb and 2-port 1Gb LOM driver. Click on Update.
  4.  
  5. That's it, you installed your first driver!
  6.  

Drivers

ad-block

Advertising seems to be blocked by your browser.

The ads help us provide this software and web site to you for free.

Please support our project by allowing our site to show ads.