ad-block

Advertising seems to be blocked by your browser.

The ads help us provide this software and web site to you for free.

Please support our project by allowing our site to show ads.





Emulex Emulex OCl11104-F2-X Virtual Fabric Adapter 2-port 10Gb and 2-port 1Gb LOM - two ways of downloading and installing the driver


Emulex OCl11104-F2-X Virtual Fabric Adapter 2-port 10Gb and 2-port 1Gb LOM is a Network Adapters hardware device. This Windows driver was developed by Emulex. In order to make sure you are downloading the exact right driver the hardware id is PCI/VEN_19A2&DEV_0710&SUBSYS_E70C10DF.

1. Emulex Emulex OCl11104-F2-X Virtual Fabric Adapter 2-port 10Gb and 2-port 1Gb LOM - install the driver manually


  1. You can download from the link below the driver setup file for the Emulex Emulex OCl11104-F2-X Virtual Fabric Adapter 2-port 10Gb and 2-port 1Gb LOM driver. The archive contains version 10.0.718.26 dated 2014-01-02 of the driver.
  2.  
  3. Run the driver installer file from a user account with the highest privileges (rights). If your UAC (User Access Control) is started please accept of the driver and run the setup with administrative rights.
  4.  
  5. Follow the driver setup wizard, which will guide you; it should be pretty easy to follow. The driver setup wizard will analyze your PC and will install the right driver.
  6.  
  7. When the operation finishes shutdown and restart your computer in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
  8.  
This driver is digitally signed by the manufacturer.
Download size of the driver: 644257 bytes (629.16 KB)
This driver was installed by many users and received an average rating of 4.4 stars out of 69603 votes.
This driver is fully compatible with the following versions of Windows:

  • This driver works on Windows 8 (6.2) 64 bits



2. How to use DriverMax to install Emulex Emulex OCl11104-F2-X Virtual Fabric Adapter 2-port 10Gb and 2-port 1Gb LOM driver


The advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date, not just this one. How can you install a driver with DriverMax? Let's follow a few steps!

  1. Start DriverMax and click on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
  2.  
  3. Take a look at the list of available driver updates. Search the list until you locate the Emulex Emulex OCl11104-F2-X Virtual Fabric Adapter 2-port 10Gb and 2-port 1Gb LOM driver. Click on Update.
  4.  
  5. That's it, you installed your first driver!
  6.  

Drivers

ad-block

Advertising seems to be blocked by your browser.

The ads help us provide this software and web site to you for free.

Please support our project by allowing our site to show ads.