ad-block

Advertising seems to be blocked by your browser.

The ads help us provide this software and web site to you for free.

Please support our project by allowing our site to show ads.





Download and install Fronius Datalogger driver


Datalogger is a USB Universal Serial Bus device. This driver was developed by Fronius. In order to make sure you are downloading the exact right driver the hardware id is USB/VID_101E&PID_0005.

1. Fronius Datalogger driver - how to install it manually


  1. You can download from the link below the driver setup file for the Fronius Datalogger driver. The archive contains version 2.06.00 released on 2009-10-22 of the driver.
  2.  
  3. Start the driver installer file from a user account with the highest privileges (rights). If your User Access Control Service (UAC) is enabled please accept of the driver and run the setup with administrative rights.
  4.  
  5. Go through the driver installation wizard, which will guide you; it should be pretty easy to follow. The driver installation wizard will scan your computer and will install the right driver.
  6.  
  7. When the operation finishes shutdown and restart your computer in order to use the updated driver. It is as simple as that to install a Windows driver!
  8.  
Fronius applied a digital signature to this driver.
Size of this driver: 501471 bytes (489.72 KB)
Driver rating 4.5 stars out of 69295 votes.
This driver will work for the following versions of Windows:

  • This driver works on Windows 2000 (5.0) 64 bits
  • This driver works on Windows XP (5.1) 64 bits
  • This driver works on Windows Server 2003 (5.2) 64 bits
  • This driver works on Windows Vista (6.0) 64 bits
  • This driver works on Windows 7 (6.1) 64 bits
  • This driver works on Windows 8 (6.2) 64 bits
  • This driver works on Windows 8.1 (6.3) 64 bits
  • This driver works on Windows 10 (10.0) 64 bits



2. Using DriverMax to install Fronius Datalogger driver


The most important advantage of using DriverMax is that it will setup the driver for you in just a few seconds and it will keep each driver up to date. How easy can you install a driver using DriverMax? Let's follow a few steps!

  1. Start DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your computer.
  2.  
  3. Take a look at the list of available driver updates. Scroll the list down until you find the Fronius Datalogger driver. Click the Update button.
  4.  
  5. That's all, the driver is now installed!
  6.  

Drivers

ad-block

Advertising seems to be blocked by your browser.

The ads help us provide this software and web site to you for free.

Please support our project by allowing our site to show ads.